Our Expert Flooring Designers Can Help You Choose The Carpet Style That’s Right For You
Type 1: Think Solid and Expansive
Solid wood floors are made of solid pieces of wood that have tongue and groove sides. They tend to be floors that are unfinished, but there are also many pre-finished 3/4” solid wood floors. Solid wood floors are sensitive to moisture and are not recommended for installation below ground level or directly over a concrete slab. Solid wood floors can be refinished, or recoated, several times, which adds to their appeal and their long life in your home. Because they are a natural product, hardwood flooring will expand and contract in response to seasonal changes in moisture. Therefore, it is important to leave a proper expansion area around the perimeter and to acclimate the wood prior to installation when installing a solid strip floor. This will help assure a lasting, beautiful application.
Oak is commonly used for solid, unfinished wood floors. There are several different qualities of oak to choose from. These qualities are clear, select, better, #1 common, and #2 common. The clear has no visual blemishes or knots and is extremely expensive. While the select and better qualities have some small knots and very little dark graining. The #1 common and #2 common have more knots and more dark graining. Be aware of this and know which quality of wood you are buying.
Type 2: The Efficient Engineered Solution
Engineered wood floors are generally manufactured with 2, 3, or 5 thin sheets, or plies, of wood that are laminated together to form one plank. Then a wood veneer is added to the top layer. This construction creates a wood floor that is dimensionally stable and less affected by moisture than a solid wood floor. One advantage of engineered construction is that the plies can counteract each other which will stop the plank from growing or shrinking with changes in humidity. Another advantage is versatility. You can install these floors over any subfloor. Most engineered floors can be nailed down, stapled down, glued down, or floated. Engineered floors range in sizes and the board widths can be mixed to create a truly custom look for your home. Because engineered floors are made from several layers of wood, the top finish layer can be a completely different wood species.
Type 3: The Easy-To-Replace Longstrip
Longstrip plank floors have several wood plies that are glued together. The center core is generally a softer wood material and is used to make the tongue and groove. A hardwood finish layer is glued on top of the core. The top layer can be almost any hardwood species and is made up of many smaller individual pieces that are laid in three rows. Longstrip planks are approximately 86” in length and 7 1/2” in width. The have between 17-35 pieces that make up the top layer of each board. This gives the effect of installing a board that is three rows wide and several planks long. Each longstrip plank looks like an entire section that has already been pre-assembled. Longstrip planks are designed for a floating installation but can also be glued or stapled down. Because these floors are generally floated, they are extremely versatile and can go over a wide variety of subfloors. Longstrip floors come in a wide variety of hardwood species and are easy to replace. This can be an advantage for active homes.